Sample VPN Address Information Table

The IP address that identifies the IPSec-compatible device on the Internet. ISP

Example:
Site A: 203.0.113.2
Site B: 198.51.100.2

An address used to identify a local network. These are the IP addresses of the computers on each side that are allowed to send traffic through the VPN tunnel. We recommend that you use an address from one of the reserved ranges:

10.0.0.0/8—255.0.0.0

172.16.0.0/12—255.240.0.0

192.168.0.0/16—255.255.0.0

The numbers after the slashes indicate the subnet masks. /24 means that the subnet mask for the trusted network is 255.255.255.0.
For more information about slash notation, see About Slash Notation.

Example:
Site A: 10.0.1.0/24
Site B: 10.50.1.0/24

The shared key is a passphrase used by two IPSec-compatible devices to encrypt and decrypt the data that goes through the VPN tunnel. The two devices use the same passphrase. If the devices do not have the same passphrase, they cannot encrypt and decrypt the data correctly.

Use a passphrase that contains numbers, symbols, lowercase letters, and uppercase letters for better security. For example, “Gu4c4mo!3” is better than “guacamole”.

Example:
Site A: OurShared/Secret
Site B: OurShared/Secret

DES uses 56-bit encryption. 3DES uses 168-bit encryption. AES encryption is available at the 128-bit, 192-bit, and 256-bit levels. AES-256 bit is the most secure encryption. The two devices must use the same encryption method.

Example:
Site A: AES-256
Site B: AES-256