Unpair an AP

To unpair a WatchGuard AP from a Firebox, you remove the AP from the Paired Access Point list in the Gateway Wireless Controller. When you unpair an AP, the AP restarts with factory-default settings.

Automatically deployed APs are reset to factory-default settings if you disable the Automatic Deployment feature.

To unpair an AP from your Firebox, from Fireware Web UI:

Select Network > Gateway Wireless Controller.
Select the Access Points tab.
The list of paired Access Points appears in the list at the top of the Access Points tab.
From the Access Points list, select the AP to unpair.
Use the Control or Shift keys to select multiple APs at the same time.
Click Remove.
The selected Access Points are removed from the configuration. The Firebox resets the AP to factory-default settings.

To unpair an AP from your Firebox, from Policy Manager:

Select Network > Gateway Wireless Controller.
Select the Access Points tab.
The list of paired Access Points appears in the list at the top of the Access Points tab.
From the Access Points list, select the AP to unpair.
Use the Control or Shift keys to select multiple APs at the same time.
Click Remove.
The selected Access Points are removed from the configuration.
Save the configuration to the Firebox.
The Firebox resets the AP to factory-default settings.

After the unpaired AP restarts with factory-default settings, the Gateway Wireless Controller can discover it again as an unpaired AP.

Unpair an AP

See Also